J-Tech Digital HDMI Wireless Extender 1080p@60Hz, 200ft, Low Latency
- Manufacturer
- J-Tech Digital
- SKU
- JTD-611
- Model Number
- JTECH-WEX200V3
- Last Updated On
- about 1 year ago
Images
Product Overview
Product Dimension
Product Interface
Application
Application
Feature
Package List
Resources
| Category | Name | Version | Size | Format |
|---|---|---|---|---|
Manual
| User Manual | 1.0 | 2.79 MB | |
Firmware
| Firmware Update Spelling correction (singal > signal) | 1.0 | 16.8 MB | bin |
Specifications
Video
- Resolution
- Up to 1080P@50/60Hz
- Max bandwidth
- 225MHz
- Max baud rate
- 6.75Gbps
- Input/Output TMDS signal
- 0.5 ~ 1.5 Volts p-p (TTL)
- Input/Output DDC signal
- 5 Volts p-p (TTL)
- HDMI Output Cable Distance
- ≤12m AWG26 HDMI standard cable
- Transmission Distance
- Up to 200ft. (in open space)
- Storage Temperature Range
- -20°C to +60°C
Audio
- Audio Format
- LPCM2.0/48KHz/16Bit
General
- Antenna type
- External dual 3dBi gain antenna
- Wireless standard
- IEEE 802.11a/n
- Wireless Band
- 5GHz ISM Band
- Max Data rates
- 2T2R up to 300Mbps
- Transmit Output Power(IPEX)
- 20dBm Max
- TX/RX Max working current
- 1A
- Power Adapter Format Input
- AC 100V~240V 50HZ/60Hz, DC12A
- Operating Temperature Range
- -5°C to + 45°C
- Operating Humidity Range
- 10 to 90%RH (No Condensation)
- Storage Humidity Range
- 5 to 95%RH (No Condensation)
- Case Dimension (L x W x H)
- 5 x 5 x 0.98 (in)
- Weight
- TX .359 lbs / RX.352lbs
Communications
- IR Carrier frequency
- 20-60KHz
Frequently asked questions
- What is the best way to get the extenders to pair?
- It is recommended that you power up the extenders only, wait until you get a solid status light on both transmitter and receivers. Once you see a solid status light on both, this indicated that units are paired. When the HDMI source is connected on transmitter and HDMI output is connected to display on the receiver, the status light will begin to flash. Indicating they are paired and detecting the source. HDMI light will be lit on the transmitter or receiver indicating a display is detected. Your signal should appear.
- How to configure many to many set up with JTD-611v3
- For many to many set up, you have to change your SSID as the more receivers is connected to a transmitter, more power is being utilized so it's difficult for the transmitter to send signal. Recommended set up is 2 receivers per transmitter. 3 receivers has been accomplish but chances of interference can happen. Step 1: Power on your first transmitter, leaving the second transmitter off Step 2: Go into your network settings and connect to JTD_HDMI_Wireless_1 Password: 00000000(eight 0's) Step 3: Go into a web browser and type in it's IP address: 192.168.1.10 password: "admin" Step 4: Change the SSID of the 1st transmitter to JTD_HDMI_Wireless_2 and hit save Step 5: Now start powering on both your receivers and connect it to the transmitter. The two receivers will now hold the SSID of JTD_HDMI_Wireless_2 even if rebooted. The second transmitter can keep the SSID of JTD_HDMI_Wireless_1 so you can go ahead and connect the other receivers to that first transmitter. Now you will be able to use both the transmitters at the same time without any network conflicts.
- Why am I not getting any picture or sound on my device?
- 1) Make sure the source device is connected to the Transmitter (Tx) 2) Make sure the Receiver (Rx) is connected to the Output Device (TV Projector) 3) Double check your HDMI cables, make sure your units have both the POWER and STATUS lights on. 4) Make sure the source is using a supported resolution, maximum is 1080p. 5) Make sure the unit is within operating range (200ft) 6) If the Transmitter (tx) of one pair is competing with other Transmitters (Tx) they maybe interfering with each other, refer to the FAQ about configuring a many to many setups.
- What does the LED status on TX and RX
- HDMI = Solid on both units (When data signal is passing through HDMI out) Status = Flashing once per second (When TX an RX are paired)
- Does this product work with Apple Tv model A2737
- Yes, it does work with Apple TV model A237
- What frequencies the jtd-611v3 uses?
- channel 36 5.18GHz channel 44 5.22GHz channel 48 5.24GHz channel 149 5.745GHz channel 153 5.765GHz channel 161 5.805GHz channel 165 5.825GHz
- How many receivers can be paired with 1 transmitter?
- We recommend paring up to 2 receivers per transmitter unit. Pairing more can result in loss of signal or connectivity.
Package Contents
- 1 x Transmitter
- 1 x Receiver
- 2 x Power adapters
- 2 x IR Cables
Features
- 𝐀𝐦𝐚𝐳𝐢𝐧𝐠 𝐕𝐢𝐝𝐞𝐨 𝐐𝐮𝐚𝐥𝐢𝐭𝐲 𝐔𝐩 𝐓𝐨 𝟐𝟎𝟎 𝐅𝐭 𝐀𝐰𝐚𝐲: JTECH-WEX200V3 is the most powerful wireless HDMI extender on the market. Extend an HDMI audio/video signal wireless up to 200 ft (61m) through interior drywall and other obstructions.
- 𝐓𝐰𝐨 𝐑𝐞𝐜𝐞𝐢𝐯𝐞𝐫𝐬 𝐀𝐭 𝐒𝐚𝐦𝐞 𝐓𝐢𝐦𝐞: Connect one transmitter to two JTECH-WEX200V3 receivers and a local HD display simultaneously! Perfect for sharing content like movies or security systems throughout the house or business!
- 𝐔𝐩 𝐓𝐨 𝟒 𝐒𝐞𝐭𝐬 𝐈𝐧 𝐓𝐡𝐞 𝐒𝐚𝐦𝐞 𝐄𝐧𝐯𝐢𝐫𝐨𝐧𝐦𝐞𝐧𝐭: Connect up to 4 independent pairs of JTECH-WEX200V3 in the same environment without interference. Users can customize both the SSID and 5GHz operating frequency of each WEX200V3 set to allow for multiple extender sets in the same environment.
- 𝐕𝐚𝐫𝐢𝐚𝐛𝐥𝐞 𝟓𝐆𝐇𝐳 𝐅𝐫𝐞𝐪𝐮𝐞𝐧𝐜𝐲 𝐒𝐞𝐥𝐞𝐜𝐭𝐢𝐨𝐧: Avoid WiFi and other wireless 5GHz interference in high-traffic wireless areas by choosing the operating channel of your JTECH-WEX200 V3 set. Users can now access the JTECH-WEX200 V3’s web interface to customize SSID, operating channels & more.
- 𝐃𝐞𝐥𝐚𝐲/𝐋𝐚𝐭𝐞𝐧𝐜𝐲 𝐓𝐢𝐦𝐞 𝐢𝐬 𝟎.𝟏-𝟎.𝟑 𝐬𝐞𝐜𝐨𝐧𝐝𝐬: Good for video playback. NOT ideal for real-time shooting or PC gaming. FULL HD Support: 60/50HZ @1080P, 60/50HZ@1080I, 60/50HZ @720P, 60/50HZ@576P, 50HZ@576I, 60HZ@480P, 60HZ@480I Free Lifetime Support: This item includes free lifetime technical support from the manufacture and free 1 Year Manufacturer Warranty from J-Tech Digital.
We're here to help
Have a different question and can’t find the answer you’re looking for?