J-Tech Digital 24-Port PoE Gigabit Managed Ethernet Switch For AV over IP

Images

Product Overview

Feature

Application

Product Interface

Product Dimension

Package List

Category	Name	Version	Size	Format
Manual Name User Manual v1.0	User Manual	1.0	5.45 MB	pdf

General

General Specifications: V-Ring looped redundancy technology
Self-healing time for looped network is less than 20ms.
PoE management
POE load timing restart and on-off
IGMP Snooping
Static multicast filtering
MLD Snooping filtering
DHCP Snooping
NTP, easy for real-time synchronization of network time
Supports SNMP v1/v2/v3
Supports LLDP
ACL, enhance the flexibility and safety of network management
QoS, enhance the stability of network
Port mirror, convenient for online debug
802.1x authentication to port and MAC
Static routing L3 switching technology
Operation temperature range: -40℃～75℃
Storage temperature range: -40℃～85℃

How do you login to the POE Switch?: 1) connect your PC to any of the ports on the POE switch except the console port. 2) change your pc's default IP scheme to match the switch's IP scheme 3) Start> Control Panel> Network and Sharing Center. 4) Change Adapter Settings. 5)Highlight the network adapter you want to use to connect to the device and click 6)Change settings of this connection. 7)The local Area commotion properties window for Network selection appears as below: 8)Click the Highlight Internet Protocol Version 4 (TCP/IPv4). 9)Click Properties. 10) Select Use the following IP Address for static IP addressing and fill in the details. 11) enter the POE switch's IP address in the web browser 12) login window will appear 13) enter the username "admin" and password "system" then click login
How do you update the firmware of the POE Switch?: 1)login to the web controls 2)go to "Device > Maintenance > Sofware Update. 3) Click "Browse"> select the latest file version, and click <OK> button to start the upgrade. 4) DO NOT POWER OFF THE DEVICE DURING THE UPGRADE PROCESS

24 x PoE Ports @ 370W | 4 x SFP Uplink Ports
Max power of single PoE port for IEEE 802.3af devices 15.4W, for IEEE 802.3at devices 25.5W
Web-based Interface or Telnet for convenient control
PoE Management, IGMP Snooping, MLD Snooping, Jumbo Frames (enabled by default)
ACL, QoS, NTP, Port Mirror Functions
Supports SNMP v1/v2/v3, STP/RTSP/MSTP
V-Ring loop redundancy technology. Self-healing time for looped network is less than 20ms
1x authentication to port and MAC