J-Tech Digital Resources
Need Purchase?

J-Tech Digital AV Over IP H.264 HDMI Decoder 1080p@60Hz

Manufacturer
J-Tech Digital
SKU
JTD-211
Model Number
JTD-H264-N2N-R
Last Updated On
6 months ago

Images

Product Overview

Feature

Application

Application

Resources

CategorySizeFormat
Brochure
Name
Set Up Guide v1.0
420 kBdocx
Driver
Name
Control 4 Driver v2.0
77.3 kBzip
Firmware
Name
Firmware v1.0
4.99 MBzip
Software
Name
Control Center Software v1.0
1.81 MB7z
Command List
Name
IR Codes v1.0
66.9 kBpdf
Driver
Name
Control 4 Driver (Legacy) v1.0
26.5 kBzip
Driver
Name
Control 4 Driver (v4) v1.0
316 kBzip

Specifications

General
Protocol
H.264 encoder over TCP/IP
Group ID
Group 00 ~ group 63
Ports
1 x RJ45 input
1x HDMI Female port looping output
Phoenix RS232 port
IR RX port (Support 38K-56KHz)
IR Ext port (Support 38KHz)
Operating temperature
-5 to +35 ℃ (+23 to +95℉)
Operating Humidity Range
5 to 90%RH (No Condensation)
Power supply
DC 5V 1A
Power consumption
3W (Max)
Dimensions
119x79.5x28mm
Net Weight
0.28KG
Video
Resolution
Up to 1080P 60Hz
Streaming Bit Rate
15Mbps
Audio
Audio Format Support
LPCM
Audio sampling rate 48KHZ
Communications
IR Frequency
38 -56 KHz
RS232 Baud rate
Default 2400bps
Default IP
192.168.1.12
Request for Switch/Router
Support IGMP
Support DHCP

Frequently asked questions

What is the default IP address for the 210/211
TX: 192.168.1.11 RX: 192.168.1.12
What is the default IP address?
TX: 192.168.1.11, and RX: 192.168.1.12
What network switch do I need?
The switch needs to supports IGMP Querier and IGMP Snooping. PoE is optional. For best results we recommend our JTECH-NSP24 and JTECH-NSP48 switches.
Does the PC control software work on MacOS?
No
What is the Default IP address?
A: TX: 192.168.1.11 ; RX: 192.168.1.12
How much latency is added?
The delay of jtd-210 and jtd-211 is between 200ms. The bandwidth occupies about 13-15M.

Package Contents

  • 1 x HDMI Extender Transmitter
  • 1 x 5V DC Power Adapters
  • 2 x IR Cables 1 x Remote Controller
  • 1 x User Manual
  • 1 x CD

Features

  • Three modes includes point-to-point point-to-many & many-to-many. For point-to-point mode HDMI signal can be extended up to 120m (394ft) over a single Cat5E/6 cable.
  • Extend your HDMI signal from any source to any receiver can never be too easy. You can switch your sources from different transmitters just from your receiver side using remote controller or front panel button. No settings need to be changed for your transmitters and network router. Also you can use rs232 or PC software to control the system.
  • Signal is encoded into H.264 which significantly reduces the bandwidth usage but maintain high video quality. The extender system can be used on your home network as long as your network router supports IGMP function.
  • With IR Remote to choose the source, with LED to show the Group ID
  • Comply with TCP/IP protocol, streaming bit rate is up to 15Mbps
  • Support LPCM audio format

We're here to help

Have a different question and can’t find the answer you’re looking for?